![]() |
|
İziBiz eFatura Listeleme - Baskı Önizleme +- Delphi Can (https://www.delphican.com) +-- Forum: Delphi (https://www.delphican.com/forumdisplay.php?fid=3) +--- Forum: Genel Programlama (https://www.delphican.com/forumdisplay.php?fid=6) +--- Konu Başlığı: İziBiz eFatura Listeleme (/showthread.php?tid=5904) Sayfalar:
1
2
|
İziBiz eFatura Listeleme - MuhammedYasir - 11-04-2021 Arkadaşlar bir konuda takıldım, yardımlarınızı rica ediyorum. Aşağıdaki kod ile gelen ve giden faturaları listelemek istiyorum. izibiz'in test portalında gelen ve giden faturalar olmasına rağmen sonuç sıfır dönüyor. Daha önce bu servis ile çalışan arkadaşlar nerede hata yapıyorum, yardımcı olabilir misiniz?
procedure TFMain.BtnListeleClick(Sender: TObject);
var
I: Integer;
FaturaTalebiAlma: GetInvoiceRequest;
FaturaSorgu: INVOICE_SEARCH_KEY2;
FaturaTalebiYaniti: GetInvoiceResponse;
BaslamaTarihi: TXSDate;
BitisTarihi: TXSDate;
Ticks: Cardinal;
begin
if OturumID = '' then
BtnBaglanClick(Sender);
Ticks := GetTickCount();
FaturaTalebiAlma := nil;
FaturaTalebiYaniti := nil;
try
FaturaSorgu := INVOICE_SEARCH_KEY2.Create();
FaturaSorgu.LIMIT := 100;
FaturaSorgu.READ_INCLUDED := true;
if CbxFaturaTuru.Text = 'e-Fatura GELEN' then
FaturaSorgu.DIRECTION := 'IN';
if CbxFaturaTuru.Text = 'e-Fatura GİDEN' then
FaturaSorgu.DIRECTION := 'OUT';
BaslamaTarihi := TXSDate.Create();
BaslamaTarihi.AsDate := DateTimePicker1.DateTime;
FaturaSorgu.START_DATE := BaslamaTarihi;
BitisTarihi := TXSDate.Create();
BitisTarihi.AsDate := DateTimePicker2.DateTime;
FaturaSorgu.END_DATE := BitisTarihi;
FaturaTalebiAlma := GetInvoiceRequest.Create();
FaturaTalebiAlma.HEADER_ONLY := 'N';
FaturaTalebiAlma.INVOICE_SEARCH_KEY := FaturaSorgu;
FaturaTalebiAlma.REQUEST_HEADER := TalepBaslik; // Form wide private variable
if Assigned(FaturaTalebiYaniti) then
begin
Log('Faturalar:');
if Length(FaturaTalebiYaniti) > 0 then
begin
for I := Low(FaturaTalebiYaniti) to High(FaturaTalebiYaniti) do
begin
// SaveInvoice(FaturaTalebiYaniti[I]);
Log('ID: ' + FaturaTalebiYaniti[I].ID + ', UUID: ' + FaturaTalebiYaniti[I].UUID
+ ', Date: ' + FaturaTalebiYaniti[I].HEADER.ISSUE_DATE.NativeToXS());
// MarkInvoice(FaturaTalebiYaniti[I]);
end;
end
else
begin
Log('Yeni Fatura Yok');
end;
end
else
begin
Log('Yeni Fatura Yok');
end;
finally
FaturaTalebiAlma.REQUEST_HEADER := nil; // Do not free Form wide variable
FaturaTalebiAlma.Free();
if Length(FaturaTalebiYaniti) > 0 then
begin
for I := Low(FaturaTalebiYaniti) to High(FaturaTalebiYaniti) do
FaturaTalebiYaniti[I].Free();
end;
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
İziBiz eFatura Listeleme - mkysoft - 11-04-2021 Vermis oldugunuz kodda servisi cagirdiniz kismi goremedim. FaturaTalebiYaniti degiskenine atama yapilmamis gibi gorunuyor. Cvp: İziBiz eFatura Listeleme - MuhammedYasir - 11-04-2021 (11-04-2021, Saat: 15:48)mkysoft Adlı Kullanıcıdan Alıntı: Vermis oldugunuz kodda servisi cagirdiniz kismi goremedim. FaturaTalebiYaniti degiskenine atama yapilmamis gibi gorunuyor. Servisi bu kod ile çağırıyorum. procedure TFMain.BtnBaglanClick(Sender: TObject);
var
GirisTalebi: LoginRequest;
GirisYaniti: LoginResponse;
I: Integer;
Ticks: Cardinal;
begin
HTTPRIO1.URL := EditServisAdi.Text;
Ticks := GetTickCount();
GirisYaniti := nil;
GirisTalebi := LoginRequest.Create();
try
GirisTalebi.USER_NAME := EditKullaniciAdi.Text;
GirisTalebi.PASSWORD := EditSifre.Text;
GirisTalebi.REQUEST_HEADER := TalepBaslik;
Servis := (HTTPRIO1 as EFaturaOIBPort);
try
Log('*** GİRİŞ ***');
GirisYaniti := Servis.Login(GirisTalebi);
except
on E: Exception do
begin
Log('HATA - Giriş: ' + E.Message);
if Assigned(GirisYaniti) then
begin
Log('Web hizmeti dönüş kodu açıklaması: ' +
GirisYaniti.REQUEST_RETURN.RETURN_CODE.ToString());
if Length(GirisYaniti.REQUEST_RETURN.WARNINGS) > 0 then
begin
Log('Web hizmeti uyarıları: ');
for I := Low(GirisYaniti.REQUEST_RETURN.WARNINGS)
to High(GirisYaniti.REQUEST_RETURN.WARNINGS) do
begin
Log(GirisYaniti.REQUEST_RETURN.WARNINGS[I]);
end;
end;
end;
Exit();
end;
end;
Log('Session ID: ' + GirisYaniti.SESSION_ID);
OturumID := GirisYaniti.SESSION_ID;
TalepBaslik.SESSION_ID := GirisYaniti.SESSION_ID;
finally
GirisTalebi.REQUEST_HEADER := nil; // Do not free Form wide variable
GirisTalebi.Free();
GirisYaniti.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
end;
end;
İziBiz eFatura Listeleme - Abdullah ILGAZ - 11-04-2021 FaturaTalebiAlma nesnesini doldurduktan sonra servisteki ilgili metoda sorguyu gönderirken parametre geçip FaturaTalebiYaniti nesnesine dönüş değerini atamanız gerekiyor. Onu hangi satırda yaptınız? Cvp: İziBiz eFatura Listeleme - MuhammedYasir - 12-04-2021 (11-04-2021, Saat: 20:29)Abdullah ILGAZ Adlı Kullanıcıdan Alıntı: FaturaTalebiAlma nesnesini doldurduktan sonra servisteki ilgili metoda sorguyu gönderirken parametre geçip FaturaTalebiYaniti nesnesine dönüş değerini atamanız gerekiyor. Onu hangi satırda yaptınız? Abdullah Bey buradaki Salih Demircan eFatura Örneği üzerinden gidiyorum, aynı sorun burada da var. unit uMain;
interface
uses
Winapi.Windows,
Winapi.Messages,
System.SysUtils,
System.Variants,
System.Classes,
Vcl.Graphics,
Vcl.Controls,
Vcl.Forms,
Vcl.Dialogs,
Soap.InvokeRegistry, // THTTPRIO require
Soap.Rio, // THTTPRIO
Soap.SOAPHTTPClient, // THTTPRIO require
Vcl.StdCtrls,
Vcl.ExtCtrls,
EFaturaOIB, Vcl.Buttons // İzibiz Web Service E-Fatura
;
type
TUTF8EncodingWithoutBOM = class(TUTF8Encoding)
public
function Clone: TEncoding; override;
function GetPreamble: TBytes; override;
end;
type
TForm1 = class(TForm)
Panel1: TPanel;
btnLogin: TButton;
Memo1: TMemo;
Panel2: TPanel;
Bevel1: TBevel;
GroupBox1: TGroupBox;
Label3: TLabel;
edtSenderVkn: TEdit;
Label4: TLabel;
edtSenderGB: TEdit;
GroupBox2: TGroupBox;
Label5: TLabel;
Label6: TLabel;
edtReceiverVkn: TEdit;
edtReceiverPK: TEdit;
GroupBox3: TGroupBox;
Label1: TLabel;
Label2: TLabel;
edtUser: TEdit;
Edit2: TEdit;
Label7: TLabel;
edtInvoiceFile: TEdit;
Label8: TLabel;
edtURL: TEdit;
Panel3: TPanel;
btnGetInvoices: TButton;
btnSendInvoice: TButton;
Bevel2: TBevel;
btnGetInvoicesSent: TButton;
btnMarkInvoiceManual: TButton;
Panel5: TPanel;
btnSendServerResponseAccept: TButton;
Label9: TLabel;
edtInvoiceAccept: TEdit;
Bevel3: TBevel;
btnSendServerResponseReject: TButton;
Label10: TLabel;
edtInvoiceReject: TEdit;
Panel6: TPanel;
Bevel4: TBevel;
btnCheckUserByIdentifier: TButton;
Label11: TLabel;
edtUserID: TEdit;
btnCheckUserByTitle: TButton;
Label12: TLabel;
edtUserTitle: TEdit;
btnGetUserList: TButton;
spdClearLogLines: TSpeedButton;
procedure btnLoginClick(Sender: TObject);
procedure FormCreate(Sender: TObject);
procedure FormDestroy(Sender: TObject);
procedure btnGetInvoicesClick(Sender: TObject);
procedure btnSendInvoiceClick(Sender: TObject);
procedure btnGetInvoicesSentClick(Sender: TObject);
procedure btnMarkInvoiceManualClick(Sender: TObject);
procedure btnSendServerResponseAcceptClick(Sender: TObject);
procedure btnSendServerResponseRejectClick(Sender: TObject);
procedure btnCheckUserByIdentifierClick(Sender: TObject);
procedure btnCheckUserByTitleClick(Sender: TObject);
procedure btnGetUserListClick(Sender: TObject);
procedure spdClearLogLinesClick(Sender: TObject);
private
{ Private declarations }
InboxDir: string;
ReqHeader: REQUEST_HEADERType; // Form wide variable
MyEncoding: TUTF8EncodingWithoutBOM;
procedure Log(const Value: string);
procedure SaveInvoice(const AInvoice: INVOICE);
procedure MarkInvoice(const AInvoice: INVOICE);
public
{ Public declarations }
end;
var
Form1: TForm1;
implementation
{$R *.dfm}
uses
Soap.XSBuiltIns, // TXSDate class
System.IOUtils, // TPath class
System.Types // TByteDynArray type
;
{ TUTF8EncodingWithoutBOM }
//******************************************************************************
function TUTF8EncodingWithoutBOM.Clone: TEncoding;
begin
Result := TUTF8EncodingWithoutBOM.Create;
end;
//******************************************************************************
function TUTF8EncodingWithoutBOM.GetPreamble: TBytes;
begin
Result := nil;
end;
{ TForm1 }
//******************************************************************************
procedure TForm1.btnCheckUserByIdentifierClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Request: CheckUserRequest;
Response: CheckUserResponse;
Ticks: Cardinal;
I: Integer;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
Request := nil;
Response := nil;
try
Request := CheckUserRequest.Create();
Request.USER := GIBUSER.Create();
Request.USER.IDENTIFIER := edtUserID.Text;
Request.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** CHECKUSER-ID ***');
Response := WS.CheckUser(Request);
except
on E: Exception do
begin
Log('ERROR-CheckUser: ' + E.Message);
Exit();
end;
end;
Log('User details:');
for I := Low(Response) to High(Response) do
begin
Log('ID: ' + Response[I].IDENTIFIER + ', ALIAS: ' + Response[I].ALIAS + ', TITLE: ' + Response[I].TITLE);
end;
finally
for I := Low(Response) to High(Response) do
begin
Response[I].Free();
end;
Request.REQUEST_HEADER := nil;
Request.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnCheckUserByTitleClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Request: CheckUserRequest;
Response: CheckUserResponse;
Ticks: Cardinal;
I: Integer;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
Request := nil;
Response := nil;
try
Request := CheckUserRequest.Create();
Request.USER := GIBUSER.Create();
Request.USER.TITLE := edtUserTitle.Text;
Request.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** CHECKUSER-TITLE ***');
Log('INFO: This operation may take time. Average would be around 60 seconds.');
Response := WS.CheckUser(Request);
except
on E: Exception do
begin
Log('ERROR-CheckUser: ' + E.Message);
Exit();
end;
end;
Log('User details:');
for I := Low(Response) to High(Response) do
begin
Log('ID: ' + Response[I].IDENTIFIER + ', ALIAS: ' + Response[I].ALIAS + ', TITLE: ' + Response[I].TITLE);
end;
Log('Total users listed: ' + FormatFloat('#,##0 ad', Length(Response)));
finally
for I := Low(Response) to High(Response) do
begin
Response[I].Free();
end;
Request.REQUEST_HEADER := nil;
Request.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnGetInvoicesClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
I: Integer;
GetInvoiceReq: GetInvoiceRequest;
InvoiceSearchKey: INVOICE_SEARCH_KEY2;
GetInvoiceRes: GetInvoiceResponse;
SDate: TXSDate;
FDate: TXSDate;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
GetInvoiceReq := nil;
GetInvoiceRes := nil;
try
GetInvoiceReq := GetInvoiceRequest.Create();
InvoiceSearchKey := INVOICE_SEARCH_KEY2.Create();
InvoiceSearchKey.LIMIT := 100;
InvoiceSearchKey.READ_INCLUDED := False;
InvoiceSearchKey.DIRECTION := 'IN';
SDate := TXSDate.Create();
SDate.AsDate := EncodeDate(2022, 01, 01);
InvoiceSearchKey.START_DATE := SDate;
FDate := TXSDate.Create();
FDate.AsDate := EncodeDate(2022, 12, 31);
InvoiceSearchKey.END_DATE := FDate;
GetInvoiceReq.HEADER_ONLY := 'N';
GetInvoiceReq.INVOICE_SEARCH_KEY := InvoiceSearchKey;
GetInvoiceReq.REQUEST_HEADER := ReqHeader; // Form wide private variable
WS := (RIO as EFaturaOIBPort);
try
Log('*** GETINVOICE ***');
GetInvoiceRes := WS.GetInvoice(GetInvoiceReq);
except
on E: Exception do
begin
Log('ERROR-GetInvoice: ' + E.Message);
Exit();
end;
end;
if Assigned(GetInvoiceRes) then
begin
Log('Invoices:');
if Length(GetInvoiceRes) > 0 then
begin
for I := Low(GetInvoiceRes) to High(GetInvoiceRes) do
begin
SaveInvoice(GetInvoiceRes[I]);
Log('ID: ' + GetInvoiceRes[I].ID + ', UUID: ' + GetInvoiceRes[I].UUID + ', Date: ' + GetInvoiceRes[I].HEADER.ISSUE_DATE.NativeToXS());
MarkInvoice(GetInvoiceRes[I]);
end;
end
else
begin
Log('No new invoice');
end;
end
else
begin
Log('No new invoice');
end;
finally
GetInvoiceReq.REQUEST_HEADER := nil; // Do not free Form wide variable
GetInvoiceReq.Free();
if Length(GetInvoiceRes) > 0 then
begin
for I := Low(GetInvoiceRes) to High(GetInvoiceRes) do
GetInvoiceRes[I].Free();
end;
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnGetInvoicesSentClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
GetInvoiceReq: GetInvoiceRequest;
InvoiceSearchKey: INVOICE_SEARCH_KEY2;
GetInvoiceRes: GetInvoiceResponse;
I: Integer;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
GetInvoiceReq := nil;
GetInvoiceRes := nil;
try
GetInvoiceReq := GetInvoiceRequest.Create();
InvoiceSearchKey := INVOICE_SEARCH_KEY2.Create();
InvoiceSearchKey.LIMIT := 10;
InvoiceSearchKey.READ_INCLUDED := True;
InvoiceSearchKey.DIRECTION := 'OUT';
GetInvoiceReq.HEADER_ONLY := 'N';
GetInvoiceReq.INVOICE_SEARCH_KEY := InvoiceSearchKey;
GetInvoiceReq.REQUEST_HEADER := ReqHeader; // Form wide private variable
WS := (RIO as EFaturaOIBPort);
try
Log('*** GETINVOICES SENT ***');
Log('Requesting 10 invoices max');
GetInvoiceRes := WS.GetInvoice(GetInvoiceReq);
except
on E: Exception do
begin
Log('ERROR-GetInvoice: ' + E.Message);
Exit();
end;
end;
if Assigned(GetInvoiceRes) then
begin
Log('Sent Invoices:');
if Length(GetInvoiceRes) > 0 then
begin
for I := Low(GetInvoiceRes) to High(GetInvoiceRes) do
begin
Log('ID: ' + GetInvoiceRes[I].ID + ', UUID: ' + GetInvoiceRes[I].UUID + ', Date: ' + GetInvoiceRes[I].HEADER.ISSUE_DATE.NativeToXS());
end;
end
else
begin
Log('No new invoice');
end;
end
else
begin
Log('No new invoice');
end;
finally
GetInvoiceReq.REQUEST_HEADER := nil; // Do not free Form wide variable
GetInvoiceReq.Free();
if Length(GetInvoiceRes) > 0 then
begin
for I := Low(GetInvoiceRes) to High(GetInvoiceRes) do
GetInvoiceRes[I].Free();
end;
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnGetUserListClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Request: GetUserListRequest;
Response: GetUserListResponse;
Ticks: Cardinal;
I: Integer;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
Request := nil;
Response := nil;
try
Request := GetUserListRequest.Create();
Request.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** GETUSERLIST ***');
Log('INFO: This operation may take time. Average would be around 60 seconds.');
Response := WS.GetUserList(Request);
except
on E: Exception do
begin
Log('ERROR-GetUserList: ' + E.Message);
Exit();
end;
end;
Log('User list:');
for I := Low(Response) to High(Response) do
begin
Log('ID: ' + Response[I].IDENTIFIER + ', ALIAS: ' + Response[I].ALIAS + ', TITLE: ' + Response[I].TITLE);
end;
Log('Total users listed: ' + FormatFloat('#,##0 ad', Length(Response)));
finally
for I := Low(Response) to High(Response) do
begin
Response[I].Free();
end;
Request.REQUEST_HEADER := nil;
Request.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnLoginClick(Sender: TObject);
var
LoginReq: LoginRequest;
LoginRes: LoginResponse;
WS: EFaturaOIBPort;
RIO: THTTPRIO;
I: Integer;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
LoginRes := nil;
LoginReq := LoginRequest.Create();
try
LoginReq.USER_NAME := edtUser.Text;
LoginReq.PASSWORD := Edit2.Text;
LoginReq.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** LOGIN ***');
LoginRes := WS.Login(LoginReq);
except
on E: Exception do
begin
Log('ERROR-Login: ' + E.Message);
if Assigned(LoginRes) then
begin
Log('Web service return code desc: ' + LoginRes.REQUEST_RETURN.RETURN_CODE.ToString());
if Length(LoginRes.REQUEST_RETURN.WARNINGS) > 0 then
begin
Log('Web service warnings: ');
for I := Low(LoginRes.REQUEST_RETURN.WARNINGS) to High(LoginRes.REQUEST_RETURN.WARNINGS) do
begin
Log(LoginRes.REQUEST_RETURN.WARNINGS[I]);
end;
end;
end;
Exit();
end;
end;
Log('Session ID: ' + LoginRes.SESSION_ID);
ReqHeader.SESSION_ID := LoginRes.SESSION_ID;
finally
LoginReq.REQUEST_HEADER := nil; // Do not free Form wide variable
LoginReq.Free();
LoginRes.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
end;
end;
//******************************************************************************
procedure TForm1.btnMarkInvoiceManualClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Ticks: Cardinal;
MarkInvoiceReq: MarkInvoiceRequest;
AMark: MARK2;
LocalInvoice: TArray<INVOICE>;
MarkInvoiceRes: MarkInvoiceResponse;
AInvoice1: INVOICE;
AInvoice2: INVOICE;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
MarkInvoiceReq := nil;
MarkInvoiceRes := nil;
try
AInvoice1 := INVOICE.Create();
AInvoice1.ID := 'SPR2014000000003';
AInvoice1.UUID := 'E95DB6B9-0F4E-47ED-B96A-37F76B6F5E18';
AInvoice2 := INVOICE.Create();
AInvoice2.ID := 'ABC2014000000115';
AInvoice2.UUID := 'CD51075F-C214-450F-AFD6-9A542E33D6AC';
SetLength(LocalInvoice, 2);
LocalInvoice[0] := AInvoice1;
LocalInvoice[1] := AInvoice2;
AMark := MARK2.Create();
AMark.INVOICE := GetInvoiceResponse2(LocalInvoice);
AMark.value := 'READ';
MarkInvoiceReq := MarkInvoiceRequest.Create();
MarkInvoiceReq.MARK := AMark;
MarkInvoiceReq.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** MARK INVOICE MANUAL ***');
MarkInvoiceRes := WS.MarkInvoice(MarkInvoiceReq);
except
on E: Exception do
begin
Log('ERROR-MarkInvoice: ' + E.Message);
Exit();
end;
end;
Log('MarkInvoice: ' + MarkInvoiceRes.REQUEST_RETURN.RETURN_CODE.ToString());
finally
MarkInvoiceRes.Free();
MarkInvoiceReq.REQUEST_HEADER := nil; // Do not free Form wide variable
MarkInvoiceReq.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
function ToByteDynArray(const B: TBytes): TByteDynArray; inline;
begin
Result := TByteDynArray(B);
end;
//******************************************************************************
procedure TForm1.btnSendInvoiceClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
SendInvoiceReq: SendInvoiceRequest;
SendInvoiceRes: SendInvoiceResponse;
InvoiceList: TArray<INVOICE>;
AInvoice: INVOICE;
AContent: base64Binary;
AContentString: string;
AContentBytes: TBytes;
I: Integer;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
if not TFile.Exists(edtInvoiceFile.Text) then
begin
Log('ERROR: Invoice File does not exists.');
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
Exit();
end;
Log('WARNING: It is necessary to modify FATURA_1.XML so it will have unique ID and UUID in it. Otherwise second send attempt will fail');
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
SendInvoiceReq := nil;
SendInvoiceRes := nil;
try
SendInvoiceReq := SendInvoiceRequest.Create();
SendInvoiceReq.SENDER := EFaturaOIB.SENDER.Create();
SendInvoiceReq.SENDER.vkn := edtSenderVkn.Text;
SendInvoiceReq.SENDER.alias := edtSenderGB.Text;
SendInvoiceReq.RECEIVER := RECEIVER.Create();
SendInvoiceReq.RECEIVER.vkn := edtReceiverVkn.Text;
SendInvoiceReq.RECEIVER.alias := edtReceiverPK.Text;
SendInvoiceReq.REQUEST_HEADER := ReqHeader;
AInvoice := INVOICE.Create();
AContent := base64Binary.Create();
AContentString := TFile.ReadAllText(edtInvoiceFile.Text, MyEncoding);
AContentBytes := TEncoding.UTF8.GetBytes(AContentString);
AContent.Text := ToByteDynArray(AContentBytes);
AInvoice.CONTENT := AContent;
SetLength(InvoiceList, 1);
InvoiceList[0] := AInvoice;
SendInvoiceReq.INVOICE := GetInvoiceResponse2(InvoiceList);
WS := (RIO as EFaturaOIBPort);
try
Log('*** SENDINVOICE ***');
SendInvoiceRes := WS.SendInvoice(SendInvoiceReq);
except
on E: Exception do
begin
Log('ERROR-SendInvoice: ' + E.Message);
Exit();
end;
end;
Log('ResponseCode: ' + SendInvoiceRes.REQUEST_RETURN.RETURN_CODE.ToString());
if Length(SendInvoiceRes.REQUEST_RETURN.WARNINGS) > 0 then
begin
Log('Response Warnings:');
for I := Low(SendInvoiceRes.REQUEST_RETURN.WARNINGS) to High(SendInvoiceRes.REQUEST_RETURN.WARNINGS) do
begin
Log(SendInvoiceRes.REQUEST_RETURN.WARNINGS[I]);
end;
end;
finally
SendInvoiceRes.Free();
SendInvoiceReq.REQUEST_HEADER := nil; // Do not free Form wide variable
SendInvoiceReq.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnSendServerResponseAcceptClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Request: SendInvoiceResponseWithServerSignRequest;
Response: SendInvoiceResponseWithServerSignResponse;
AInvoice: INVOICE;
InvoiceList: TArray<INVOICE>;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
Request := nil;
Response := nil;
try
Request := SendInvoiceResponseWithServerSignRequest.Create();
Request.REQUEST_HEADER := ReqHeader;
Request.STATUS := 'KABUL';
AInvoice := INVOICE.Create();
AInvoice.ID := edtInvoiceAccept.Text;
SetLength(InvoiceList, 1);
InvoiceList[0] := AInvoice;
Request.INVOICE := GetInvoiceResponse2(InvoiceList);
WS := (RIO as EFaturaOIBPort);
try
Log('*** SENDINVOICERESPONSE-ACCEPT ***');
Response := WS.SendInvoiceResponseWithServerSign(Request);
except
on E: Exception do
begin
Log('ERROR-SendInvoiceResponseWithServerSign: ' + E.Message);
Exit();
end;
end;
Log('Response: ' + Response.REQUEST_RETURN.RETURN_CODE.ToString());
finally
Response.Free();
Request.REQUEST_HEADER := nil; // Do not free Form wide variable
Request.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.btnSendServerResponseRejectClick(Sender: TObject);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
Request: SendInvoiceResponseWithServerSignRequest;
Response: SendInvoiceResponseWithServerSignResponse;
AInvoice: INVOICE;
InvoiceList: TArray<INVOICE>;
Ticks: Cardinal;
begin
Ticks := GetTickCount();
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
Request := nil;
Response := nil;
try
Request := SendInvoiceResponseWithServerSignRequest.Create();
Request.REQUEST_HEADER := ReqHeader;
Request.STATUS := 'RED';
AInvoice := INVOICE.Create();
AInvoice.ID := edtInvoiceReject.Text;
SetLength(InvoiceList, 1);
InvoiceList[0] := AInvoice;
Request.INVOICE := GetInvoiceResponse2(InvoiceList);
WS := (RIO as EFaturaOIBPort);
try
Log('*** SENDINVOICERESPONSE-REJECT ***');
Response := WS.SendInvoiceResponseWithServerSign(Request);
except
on E: Exception do
begin
Log('ERROR-SendInvoiceResponseWithServerSign: ' + E.Message);
Exit();
end;
end;
Log('Response: ' + Response.REQUEST_RETURN.RETURN_CODE.ToString());
finally
Response.Free();
Request.REQUEST_HEADER := nil; // Do not free Form wide variable
Request.Free();
Ticks := GetTickCount() - Ticks;
Log('Time: ' + FormatFloat('#,##0 ms', Ticks));
Log(EmptyStr);
end;
end;
//******************************************************************************
procedure TForm1.FormCreate(Sender: TObject);
begin
Memo1.Clear();
ReqHeader := REQUEST_HEADERType.Create();
ReqHeader.SESSION_ID := '0';
ReqHeader.CLIENT_TXN_ID := TGUID.NewGuid.ToString();
ReqHeader.APPLICATION_NAME := 'GELİŞİM E-FATURA V1.0';
ReqHeader.CHANNEL_NAME := 'GELİŞİM';
ReqHeader.HOSTNAME := 'HOST-GELİŞİM-DEFAULT';
ReqHeader.REASON := 'ENTEGRASYON ÇALIŞMALARI';
ReqHeader.COMPRESSED := 'N';
Log('Client transaction ID: ' + ReqHeader.CLIENT_TXN_ID);
InboxDir := TPath.Combine(TPath.GetLibraryPath(), 'inbox');
if not TDirectory.Exists(InboxDir) then
begin
if not ForceDirectories(InboxDir) then
begin
ShowMessage('Inbox directory cannot be created:' + sLineBreak + InboxDir);
end;
end;
MyEncoding := TUTF8EncodingWithoutBOM.Create();
edtInvoiceFile.Text := TPath.Combine(TPath.GetLibraryPath(), 'FATURA_1.XML');
end;
//******************************************************************************
procedure TForm1.FormDestroy(Sender: TObject);
begin
MyEncoding.Free();
ReqHeader.Free();
end;
//******************************************************************************
procedure TForm1.Log(const Value: string);
var
Prefix: string;
begin
if Value = EmptyStr then
begin
Memo1.Lines.Add(EmptyStr);
end
else
begin
Prefix := FormatDateTime('yyyy-mm-dd hh:nn:ss.zzz ', Now());
Memo1.Lines.Add(Prefix + Value);
end;
end;
//******************************************************************************
procedure TForm1.SaveInvoice(const AInvoice: INVOICE);
var
XML: string;
InboxFilename: string;
begin
if not TDirectory.Exists(InboxDir) then
begin
Log('ERROR: Inbox directory does not exists!');
Exit();
end;
XML := TEncoding.UTF8.GetString(AInvoice.CONTENT.Text);
InboxFilename := TPath.Combine(InboxDir, AInvoice.ID + '.xml');
TFile.WriteAllText(InboxFilename, XML, MyEncoding);
end;
//******************************************************************************
procedure TForm1.spdClearLogLinesClick(Sender: TObject);
begin
Memo1.Clear();
end;
//******************************************************************************
procedure TForm1.MarkInvoice(const AInvoice: INVOICE);
var
WS: EFaturaOIBPort;
RIO: THTTPRIO;
MarkInvoiceReq: MarkInvoiceRequest;
AMark: MARK2;
LocalInvoice: GetInvoiceResponse2;
MarkInvoiceRes: MarkInvoiceResponse;
begin
// *** THTTPRIO will free itself when created with no owner
// http://docwiki.embarcadero.com/RADStudio/Tokyo/en/Calling_Invokable_Interfaces
RIO := THTTPRIO.Create(nil);
RIO.URL := edtURL.Text;
MarkInvoiceReq := nil;
MarkInvoiceRes := nil;
try
MarkInvoiceReq := MarkInvoiceRequest.Create();
LocalInvoice := GetInvoiceResponse2.Create();
SetLength(LocalInvoice, 1);
LocalInvoice[0] := AInvoice;
AMark := MARK2.Create();
AMark.INVOICE := LocalInvoice;
AMark.value := 'READ';
MarkInvoiceReq.MARK := AMark;
MarkInvoiceReq.REQUEST_HEADER := ReqHeader;
WS := (RIO as EFaturaOIBPort);
try
Log('*** MARK INVOICE ***');
MarkInvoiceRes := WS.MarkInvoice(MarkInvoiceReq);
except
on E: Exception do
begin
Log('ERROR-MarkInvoice: ' + E.Message);
Exit();
end;
end;
Log('MarkInvoice: ' + MarkInvoiceRes.REQUEST_RETURN.RETURN_CODE.ToString());
finally
MarkInvoiceRes.Free();
MarkInvoiceReq.REQUEST_HEADER := nil; // Do not free Form wide variable
MarkInvoiceReq.MARK.INVOICE := nil;
MarkInvoiceReq.Free();
end;
end;
end.
İziBiz eFatura Listeleme - mkysoft - 12-04-2021 Kodu oldugu gibi kullanmadiginiz icin neresi farkli anlamak guc. Oncelikle temel aldiginiz kodu degistirmeden calisir halini yapin, sonra modifiye edin. Cvp: İziBiz eFatura Listeleme - MuhammedYasir - 12-04-2021 (12-04-2021, Saat: 00:23)mkysoft Adlı Kullanıcıdan Alıntı: Kodu oldugu gibi kullanmadiginiz icin neresi farkli anlamak guc. Oncelikle temel aldiginiz kodu degistirmeden calisir halini yapin, sonra modifiye edin. Zaten sorun kodun doğru çalışmamasından kaynaklanıyor, üstüne acemiliği de koyunca sorun büyüyor ![]() Görüldüğü gibi yukarıda tamamını paylaştığım kodun sonucu :
İziBiz eFatura Listeleme - mkysoft - 12-04-2021 Bu durumda eksik kismi tamamlamaniz lazim. Yukarida belirttigim gibi degiskene atama yapan bir yer goremedim. Cvp: İziBiz eFatura Listeleme - ikurt07 - 22-03-2023 (11-04-2021, Saat: 04:23)MuhammedYasir Adlı Kullanıcıdan Alıntı: Arkadaşlar bir konuda takıldım, yardımlarınızı rica ediyorum. Hocam tamamladın mı? İziBiz eFatura Listeleme - enigma - 29-03-2023 O program çok eski ve hatalı. Pek çok kısmı çalışmıyor. İzibiz'in teknik personeli de Delphi bilmiyor. Bu yüzden yardım edemiyorlar. Salih Demircan adlı kişi de enteresan bir şekilde o programı izibizde çalışırken yazdığını söylüyor (Bizzat telefonla konuştum.) ama izibiz bizde öyle birisi çalışmadı diyor. Zaten Salih Demircan adlı kişi de bu konuda yardımcı olamıyor. Muhtemelen o da bu programı bir yerlerden çekmiş. Bende öyle bir intiba uyandı. |