Konuyu Oyla:
  • Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
yazılım yükleme programı
#1
arkadaşlar delphi kullanımına yeni başladım android telefonlarına yazılım yükleme programı yapmak istiyorum bana yardımcı olabilirmisiniz

örnek xioami telefonuna twrp yüklemek için ne yapabilirim
Cevapla
#2
Merhaba
Delphi'nin android desteği var olduğundan yola çıkarak öngörüsel bir talebiniz olduğunu varsayıyorum. 

Öncelikle Delphi yakasını bir kenara bırakıp ADB (Android Debug Bridge) ile bu işi nasıl yaptığınızı yönerge halinde oluşturun. 

Telefonun download mode olup olmadığı, bağlantı adresi vs. adb.exe ile text mode olarak haberleşip sonuç aldıktan sonra Delphi yakadında bu iletişimin moderasyonunj yapmaya geçebilirsiniz.

Ben bunu zaten biliyorum derseniz o zaman Delphi ile DOS cmd ve komut gönderme ve cevabı memoya alma konularını bu forumda paylaşmıştık.
Saygılarımla
Muharrem ARMAN

guplouajuixjzfm15eqb.gif
Cevapla
#3
Photo 
(09-12-2021, Saat: 10:30)mrmarman Adlı Kullanıcıdan Alıntı: Merhaba
Delphi'nin android desteği var olduğundan yola çıkarak öngörüsel bir talebiniz olduğunu varsayıyorum. 

Öncelikle Delphi yakasını bir kenara bırakıp ADB (Android Debug Bridge) ile bu işi nasıl yaptığınızı yönerge halinde oluşturun. 

Telefonun download mode olup olmadığı, bağlantı adresi vs. adb.exe ile text mode olarak haberleşip sonuç aldıktan sonra Delphi yakadında bu iletişimin moderasyonunj yapmaya geçebilirsiniz.

Ben bunu zaten biliyorum derseniz o zaman Delphi ile DOS cmd ve komut gönderme ve cevabı memoya alma konularını bu forumda paylaşmıştık.



abim ilginden alakandan ötürü teşekkür ederim şöyle birşeyler yapmak istiyorum 


Ek Dosyalar Resimler
   
Cevapla
#4
Merhaba.

Bu görmüş olduğun ara yüz bir komut serisinin yorumlanması ile oluşturulmuştur.

cmd ile DOS komut sistemine çıkıp "ADB --help"  komutu verdiğinizde tüm parametreler dökülecektir.
EXE dosya konumunu aşağıda görebileceğiniz gibi :

<SDK kurulu klasörünüz altında>\android-sdk-windows\platform-tools\

klasöründe bulacaksınız...

NOT : mobil cihazın "USB Debugging Mode" açık (enabled) olması gereğini bu işlerle meşgul olan kimseler için söylememe gerek yok sanırım.

NOT2 : WiFi erişimi konusunda ADB kullanımına ilişkin bir kod dizisi paylaşmıştım bu delphican linkinden bakabilirsiniz.

c:\ARMAN.Study\Belgelerim\_PlatformSDKs\android-sdk-windows\platform-tools>adb --help
Android Debug Bridge version 1.0.41
Version 29.0.6-6198805
Installed as c:\ARMAN.Study\Belgelerim\_PlatformSDKs\android-sdk-windows\platform-tools\adb.exe

global options:
-a         listen on all network interfaces, not just localhost
-d         use USB device (error if multiple devices connected)
-e         use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL  use device with given serial (overrides $ANDROID_SERIAL)
-t ID      use device with given transport id
-H         name of adb server host [default=localhost]
-P         port of adb server [default=5037]
-L SOCKET  listen on given socket for adb server [default=tcp:localhost:5037]

general commands:
devices [-l]             list connected devices (-l for long output)
help                     show this help message
version                  show version num

networking:
connect HOST[:PORT]      connect to a device via TCP/IP
disconnect [[HOST]:PORT] disconnect from given TCP/IP device, or all
forward --list           list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
    forward socket connection using:
      tcp:<port> (<local> may be "tcp:0" to pick any open port)
      localabstract:<unix domain socket name>
      localreserved:<unix domain socket name>
      localfilesystem:<unix domain socket name>
      dev:<character device name>
      jdwp:<process pid> (remote only)
      acceptfd:<fd> (listen only)
forward --remove LOCAL   remove specific forward socket connection
forward --remove-all     remove all forward socket connections
ppp TTY [PARAMETER...]   run PPP over USB
reverse --list           list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
    reverse socket connection using:
      tcp:<port> (<remote> may be "tcp:0" to pick any open port)
      localabstract:<unix domain socket name>
      localreserved:<unix domain socket name>
      localfilesystem:<unix domain socket name>
reverse --remove REMOTE  remove specific reverse socket connection
reverse --remove-all     remove all reverse socket connections from device

file transfer:
push [--sync] LOCAL... REMOTE
    copy local files/directories to device
    --sync: only push files that are newer on the host than the device
pull [-a] REMOTE... LOCAL
    copy files/dirs from device
    -a: preserve file timestamp and mode
sync [all|data|odm|oem|product|system|system_ext|vendor]
    sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
    -l: list files that would be copied, but don't copy them

shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
    run remote shell command (interactive shell if no command given)
    -e: choose escape character, or "none"; default '~'
    -n: don't read from stdin
    -T: disable pty allocation
    -t: allocate a pty if on a tty (-tt: force pty allocation)
    -x: disable remote exit codes and stdout/stderr separation
emu COMMAND              run emulator console command

app installation (see also `adb shell cmd package help`):
install [-lrtsdg] [--instant] PACKAGE
    push a single package to the device and install it
install-multiple [-lrtsdpg] [--instant] PACKAGE...
    push multiple APKs to the device for a single package and install them
install-multi-package [-lrtsdpg] [--instant] PACKAGE...
    push one or more packages to the device and install them atomically
    -r: replace existing application
    -t: allow test packages
    -d: allow version code downgrade (debuggable packages only)
    -p: partial application install (install-multiple only)
    -g: grant all runtime permissions
    --abi ABI: override platform's default ABI
    --instant: cause the app to be installed as an ephemeral install app
    --no-streaming: always push APK to device and invoke Package Manager as separate steps
    --streaming: force streaming APK directly into Package Manager
    --fastdeploy: use fast deploy
    --no-fastdeploy: prevent use of fast deploy
    --force-agent: force update of deployment agent when using fast deploy
    --date-check-agent: update deployment agent when local version is newer and using fast deploy
    --version-check-agent: update deployment agent when local version has different version code and using fast deploy
    (See also `adb shell pm help` for more options.)
uninstall [-k] PACKAGE
    remove this app package from the device
    '-k': keep the data and cache directories

debugging:
bugreport [PATH]
    write bugreport to given PATH [default=bugreport.zip];
    if PATH is a directory, the bug report is saved in that directory.
    devices that don't support zipped bug reports output to stdout.
jdwp                     list pids of processes hosting a JDWP transport
logcat                   show device log (logcat --help for more)

security:
disable-verity           disable dm-verity checking on userdebug builds
enable-verity            re-enable dm-verity checking on userdebug builds
keygen FILE
    generate adb public/private key; private key stored in FILE,

scripting:
wait-for[-TRANSPORT]-STATE
    wait for device to be in the given state
    STATE: device, recovery, rescue, sideload, bootloader, or disconnect
    TRANSPORT: usb, local, or any [default=any]
get-state                print offline | bootloader | device
get-serialno             print <serial-number>
get-devpath              print <device-path>
remount [-R]
     remount partitions read-write. if a reboot is required, -R will
     will automatically reboot the device.
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
    reboot the device; defaults to booting system image but
    supports bootloader and recovery too. sideload reboots
    into recovery and automatically starts sideload mode,
    sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE      sideload the given full OTA package
root                     restart adbd with root permissions
unroot                   restart adbd without root permissions
usb                      restart adbd listening on USB
tcpip PORT               restart adbd listening on TCP on PORT

internal debugging:
start-server             ensure that there is a server running
kill-server              kill the server if it is running
reconnect                kick connection from host side to force reconnect
reconnect device         kick connection from device side to force reconnect
reconnect offline        reset offline/unauthorized devices to force reconnect

environment variables:
$ADB_TRACE
    comma-separated list of debug info to log:
    all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS         colon-separated list of keys (files or directories)
$ANDROID_SERIAL          serial number to connect to (see -s)
$ANDROID_LOG_TAGS        tags to be used by logcat (see logcat --help)
$ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus)
Saygılarımla
Muharrem ARMAN

guplouajuixjzfm15eqb.gif
Cevapla


Konu ile Alakalı Benzer Konular
Konular Yazar Yorumlar Okunma Son Yorum
Lightbulb Sigorta Teklif Programı Hk. erdal51 8 2.548 25-11-2024, Saat: 15:05
Son Yorum: ahmet6513
  Delphi Paket Yükleme (Warning) kajmerantime 4 1.445 13-11-2024, Saat: 11:52
Son Yorum: kajmerantime
  Pazaryerleri Muhasebe Programı Entegrasyonu bünyamin68 2 1.506 22-02-2024, Saat: 15:51
Son Yorum: ahmet6513
  Borsa takip programı(Yeniyim) rumuztr@hotmail.com 8 3.046 29-12-2023, Saat: 17:36
Son Yorum: rumuztr@hotmail.com
  Zirve Yazılım Satış Faturası Entegrasyonu Hk. pro_imaj 15 15.013 20-11-2023, Saat: 13:05
Son Yorum: hi_selamlar



Konuyu Okuyanlar: 1 Ziyaretçi